WATCH THE HOW TO VIDEO
Step 1: Fully unbutton the base layer from the frame. Lift the rear canopy rod to disconnect the backrest from the frame, then post the rod back.
Step 2: Recline the seatback
Step 3: Lift the rear canopy rod to disconnect the backrest from the frame, then put the rod back.
Step 4: Fully remove the canopy.
Step 5: Unhook the base layer.
Step 6: Fold the sides and rear mesh panel onto the backrest.
Step 7: First, slide the canopy side over the footrest. Then slide the infant kit footrest over the other side by folding it up. Make sure all straps are tucked under the infant kit.
Step 8: Hook the side support onto the frame.
Step 9: Snap the canopy into place.
Step 10: Ensure the closure straps are secured to the bottom with velcro.